123 HP Envy 4500 Troubleshooting

HP Envy 4500 Printer Troubleshooting A common troubleshooting step that has to be followed in each and every paper jam solution is printing a self-test report.

To print a self-test report, follow the below steps.

  • Load a set of plain white papers into the printer’s input tray.
  • Press the Setup key from the printer’s control panel.
  • Press the number 2 to select the Print Report menu.
  • Choose 6, and then press OK to run and print a self-test report.
  • Note:It is recommended to print a self-test report at the end of every solution, though the problem is resolved.

Clearing the Paper Jam

Remove the loose papers from the input and output tray if any.

It is always advisable to remove the jammed paper from the rear of the printer. Trying to remove the paper from the front end may cause physical damage to the printer.

  • To turn off the printer, press the Power button.
  • From the rear of the printer, disconnect the USB cable and the power cord.
  • To release the access door of the rear side, press the tab which is on the left side of the rear door. To remove it, pull the door away from your printer.
  • Inside the printer’s roller if you find any bits and pieces of paper, remove it slowly by using both hands. Remove the jammed paper completely.

    HP Envy 4500 Printer Troubleshooting

Note: Check with a flashlight, if any torn bits of paper are left inside the roller of the printer, to avoid more jams.

  • Attach the rear access door back to its place and move forward till it fits into its place.
  • Reconnect the power cord to the rear of the printer.

If you face difficulty in clearing the paper jam from the rear of the printer, follow the below steps to remove it from the front side.

  1. Press the Power button of your printer to turn it on.
  2. Opening the carriage access door leads to carriage movement into the access area. Allow it to move to that position.

    hp envy 4500 setup paper jam

  3. Disconnect the power cord from the rear side of the printer, while the printer is turned on.
  4. Note: Always turn off the power switch, if you are moving the printer parts with your hands.

Detach the printer’s output tray.

hp envy 4500 trouble shoot

  • Check for torn bits or pieces of paper stuck between the rollers; if so pull it out.
  • Get the output tray attached back to its place.
  • Close the access door of the carriage.
  • Reestablish the connection to the rear of the printer with power cord.
  • Turn on the product by pressing the Power button.

Resetting the Printer

Execute a power reset for your HP printer.

  • Press or touch the Power button and turn on your printer.
  • Remove the power cord from the rear of the printer, when the printer is turned on.
  • Make sure that the power cord is unplugged from the wall outlet.
  • heck if you have disconnected the USB cable from the rear of the printer.
  • Wait for some time and re-plug the power cord into the wall outlet.
  • Reattach the power cord to the rear of the printer.
  • Press the Power button to turn on the printer, if it does not turn on automatically.

Print a self-test report with the steps provided above without fail.
If the above steps do not work, call our customer support team on our toll-free number 1-844-968-2988 or refer our website for more solutions for your HP Envy 4500 Printer Troubleshooting paper jam issue.

Need Technical Support Ring us @ our Toll Free : 1 – 844 – 968 – 2988